Connect Peripherals to Back : Build Computers

Build Computers:
Step 11: Connect Peripherals to Back

You have installed the internal components and you are now ready to install the External Peripherals.

A: Keyboard Port - The Keyboard is connects to either a USB port or a round PS/2 connector depending on which type of keyboard you purchased.

B: Mouse Port - The mouse connects to either a USB port or a round PS/2 connector depending on which type of mouse you purchased.

C: Monitor Port - The Monitor is connected to the 15-hole female connector.

D: Power Connector - The Power connects to the 3-prong male connector on the back of the computer.

Build Computers Steps

Step 1: Inspect Your Case
Step 2: Inspect Your Motherboard
Step 3: Install the Processor and Heat Sink/Fan
Step 4: Install Memory
Step 5: Install Internal Drives
Step 6: Install Motherboard in Computer Case
Step 7: Connect Front Panel Switches/LEDs/Speaker
Step 8: Connect Power Supply Cable to Motherboard
Step 9: Install Video Card
Step 10: Install Sound Card
Step 11: Connect Peripheral to Back Pane
Step 12: Post Assembly Check
Step 13: Configure Motherboard Bios-Build Computers
Step 14: Test Boot Your Computer System-Build Computers
Step 15: Partition and Format Hard Drive-Build Computers
Build Computers Step 16: Install Operating System-Build Computers