|
Build Computers:
Step 1: Inspect Your Case
Remove the Case from the box and examine it for dents or any other visible damage. Ensure that all relevant hardware is present.
Note: Ensure that the Computer Case came with the Computer Front Panel Switches, LEDs and Speaker; otherwise.
If everything is O.K., remove the Case cover.
If the Case comes with a power supply, thoroughly inspect power supply and power supply cables. Install legs and all necessary hardware.
If Case does not come with fans, install one on the front vent of the Case and the other at the rear. Ensure that the front fan is installed to draw air into the Case - not blow out.
Also, make sure that the rear one is installed to draw air out of the Case. This helps to increase the circulation of air through the system case.
Remove plates from the drive bays that you intend to use.
Your Case is now ready for installation of components.
|
